Black Brick Audio
POWERHOUSE 12" Subwoofer
POWERHOUSE 12" Subwoofer
Couldn't load pickup availability
Low stock: 3 left
Our POWERHOUSE series subwoofers pack a serious punch pound-for-pound! If you want tons of bass without breaking the bank, this is the one for you. The POWERHOUSE 12" subwoofer produces deep lows and clear mids loaded into a compact and good looking unit.
The build features an iron basket, non-pressed paper cone, and foam mega roll surround. The 3" copper 4-layer coil and double stacked 10" NOMEX spider ensure a clear and rich sound for your vehicle stage. Powering this subwoofer is a meaty 300oz black ferrite triple stacked motor.
| Basket | Iron and Black Paint |
| Cone | Non-Pressed Paper |
| Surround | Foam Mega Roll |
| Coil | 4-Layer, 3" Flat Copper Heat Coil |
| Spider | 10" Double Stacked NOMEX |
| Motor | 300oz Black Ferrite Triple Stacked |
| OHM | Dual 2ohm or Dual 4ohm (select) |
| RMS | 2000w RMS |
| Peak | 4000w PEAK |
| XMAX | 28.5mm one-way XMAX |
| QTS | 0.28 QTS |
| QMS | 5.88 QMS |
| QES | 0.30 QES |
| CMS | 0.10 QTS |
| FS | 27.63hz |
| BL | 13.57 |
| Freq Response | 27hz - 500hz |
| Sensitivity | 87db |
| Net Weight | 34lbs |
Custom Box Specifications
| Recommended Ported Volume | 2.0"' ft 3 |
| Recommended Sealed Volume | 1.5"' ft 3 |
| Tuning | 27hz |
| Port Area | 16 square inches per cubic foot |
| Displacement | 0.18"' ft 3 |
| Cutout Diameter | 11.25" |
| Mounting Depth | 9" |
| Magnet Diameter | 9" |
| Total Height | 9.5" |
| Total Outside Diameter | 12.75" |
-
Fast Shipping
Every order is fulfilled within 2 business days and is delivered by UPS. We strive to always get your order out as fast as possible. Shipping costs reflect live market costs and we do not profit from shipping prices. Shipping pick up times and transit times will vary based on your location.
-
Warranty
Manufacturer defect and shipping damage warranty only. If product is blown and burnt such as an unwound coil, burnt black coil, burnt tinsel leads it is not covered. This also applies to amplifiers, if it is burnt inside the amp due to stress on mosfets it is not covered.