Black Brick Audio
HOSTILE 12" Subwoofers (Set of 2 Bundle)
HOSTILE 12" Subwoofers (Set of 2 Bundle)
Couldn't load pickup availability
Low stock: 10 left
Thinking about running two 12" subs in your setup? Bundle and SAVE with this combo pack of 2 subs. You save 10% when you purchase this set of two bundle. You will receive two (2) HOSTILE 12" Subwoofers.
Our HOSTILE series subwoofers balance budget-friendly prices while maintaining the legendary Black Brick Audio performance and quality. The HOSTILE 12" subwoofer produces deep lows and clear mids loaded into a compact, yet attractive unit.
The build features an iron basket coated in a wrinkle finish, non-pressed paper cone, and foam surround. The 3" flat copper 4-layer coil and double stacked 7.5" spider ensure a clear and rich sound for your vehicle stage. Powering this subwoofer is a meaty 120oz black ferrite triple stacked motor.
| Basket | Iron and Wrinkle Paint |
| Cone | Non-Pressed Paper |
| Surround | Foam |
| Coil | 4-Layer, 3" Flat Copper Heat Coil |
| Spider | 7.5" Double Stacked |
| Motor | 120oz Black Ferrite Triple Stacked |
| OHM | Dual 2ohm or Dual 4ohm (select) |
| RMS | 800w RMS |
| Peak | 1200w PEAK |
| XMAX | 22mm one-way XMAX |
| QMS | 4.677 QMS |
| QES | 0.610 QES |
| QTS | 0.540 QTS |
| FS | 42.5hz |
| BL | 21.902 |
| SD | 630 sqcm |
| Freq Response | 32 - 350hz |
| Sensitivity | 87db |
Warranty:
Manufacturer defect and shipping damage warranty only. If product is blown and burnt such as an unwound coil, burnt black coil, burnt tinsel leads it is not covered. This also applies to amplifiers, if it is burnt inside the amp due to stress on mosfets it is not covered.
-
Fast Shipping
Every order is fulfilled within 2 business days and is delivered by UPS. We strive to always get your order out as fast as possible. Shipping costs reflect live market costs and we do not profit from shipping prices. Shipping pick up times and transit times will vary based on your location.
-
Warranty
Manufacturer defect and shipping damage warranty only. If product is blown and burnt such as an unwound coil, burnt black coil, burnt tinsel leads it is not covered. This also applies to amplifiers, if it is burnt inside the amp due to stress on mosfets it is not covered.