Black Brick Audio
HEAVYHITTER 12" Subwoofer
HEAVYHITTER 12" Subwoofer
Couldn't load pickup availability
43 in stock
Our #1 Best Selling Product. Don't underestimate this mid-class subwoofer. The HEAVYHITTER 12" allows you to achieve the bass and clarity you're looking for. With 1250RMS of power, high roll surround, and a 270oz motor to push the power, this sub is ready for your setup. Welcome to true low frequency.
Specifications:
BASKET | 12" Tooling Die Cast Black Aluminum |
CONE | Non-Pressed Paper Cone |
SURROUND | High-Roll Foam Surround |
COIL | 3" CCAW Copper Voice Coil |
SPIDER | Quad Stacked 10" Spider |
MOTOR | 270oz Ferrite Triple Stacked Motor |
OHM | Dual 2ohm |
RMS | 1250w RMS |
PEAK | 2500w PEAK |
XMAX | 33mm Peak-to-Peak XMAX |
QMS | 5.31 QMS |
QES | 0.4 QES |
QTS | 0.37 QTS |
FS | 28.7hz |
BL | 26.1 |
VAS | 31.1L |
Sensitivity | 88dB |
Box Specifications (see diagram):
Woofer Diameter A | 325mm / 12.8" |
Mounting Diameter B | 303mm / 11.93" |
Mounting Diameter C | 285mm / 11.22" |
Magnet Diameter D | 198mm / 7.8" |
Motor Depth E | 84mm / 3.3" |
Gasket Depth F | 16mm / 0.63" |
Mounting Depth G | 212mm / 8.35" |
Sealed Enclosure | 1.00 ~ 1.35ft3 |
Ported Enclosure | 1.58 ~ 2.60 ft3 |
Warranty:
- Manufacturer defect and shipping damage warranty only. If product is blown and burnt such as an unwound coil, burnt black coil, burnt tinsel leads it is not covered. This also applies to amplifiers, if it is burnt inside the amp due to stress on mosfets it is not covered.






-
Fast Shipping
Every order is fulfilled within 2 business days and is delivered by UPS. We strive to always get your order out as fast as possible. Shipping costs reflect live market costs and we do not profit from shipping prices. Shipping pick up times and transit times will vary based on your location.
-
Warranty
Manufacturer defect and shipping damage warranty only. If product is blown and burnt such as an unwound coil, burnt black coil, burnt tinsel leads it is not covered. This also applies to amplifiers, if it is burnt inside the amp due to stress on mosfets it is not covered.